MSR – Automatic water level control valve |Nylon Quality| Inside Type |Side Inner| Best use for HIGH WATER PRESSURE (SIZE:- 3/4 INCH) (PACK OF 2)

This is very good product. Fully functional. Completely stop overflow water. Nice one

So we have this huge underground tank where we receive corporation water. We had a normal float valve installed which never ever took the pressure of the water from corporation line. The pressure is too high. Due to this my family had to wake up early and wait for water to fill up the underground tank and had to shut off the manual ball valve we installed between the float valve so that water doesn’t overflow and fill the house. I came across this product all of a sudden by Amazon as I was in-search for high water pressure float valve. I took the decision and bought it. The family was all skeptical when it came and didn’t wanted to let me install this one as this was looking tiny. After much of fight with family I installed it in the tank and waited the next day patiently for the line water at 6am and this float valve worked like charm as soon as the water level rose up the valve seat closed tight and no water came out from the valve. It has been more than 6months now and after installing and it has never ever failed the cut off the supply.

I, wholeheartedly thank the company and the engineering team behind this for bringing this product to the market.

Thankyou so much and please keep bringing this type of purposeful products to the market.

I have ordered this 3/4″ automatic float valve and installed into my home underground water sump, which used to overflow with conventional brass float valve not being fully functional.
This new product was something I was exactly looking for mainly a small sized device which would fit in easily and do the work perfect.

Pros :

1. Small in size and light in weight.
2. Can be easily DIY with given Teflon tape.
3. Installed today on 7th Apr 2023. Need to check for it’s durability and working under high water pressure flow rate.
4. Working fine. I have tested it with a water flow rate of 10 ltr / 16 seconds on corporation water line and it’s working perfectly by stopping soon after water level reaches the valve.
5. Given outlet elbow fitting is really needed to make the water flow straight down without spill to side walls of sump. And fitting this outlet elbow didn’t reduce the water flow rate. I tested this scenario too. 🙂
6. Teflon tape is given with the package, so that you no need to buy additionally.

Cons :

1. Price seems quite costly as the assembly is made of just plastic.
2. Flow rate reduced by 45% after fitting the valve.

I have uploaded videos showing flow rate without valve and with valve fitted, tested using a 10 ltr bucket.
a. Before fitting the flow rate was “10 ltr / 16 seconds”.
b. After fitting the valve flow rate is “10 ltr / 26 seconds” which is almost 45% of reduction in flow rate.

Hope this gives a clear picture that if water line has very low pressure water supply, then the time to fill the tank would increase by 45% as per my testing.

Need to test the valve for high pressure water.
Need to check durability of the product, how long does it last.

Amazon is allowing just one video to upload. So I’m not able to upload video of flow rate before fitting valve. If get a chance, will upload.

Ive installed 5 of them on the pressure inlet line of my water tanks and no complaints so far. Value for money , i would say….